Anchoring and Mooring
Systems
Systems
Vertical Windlasses
DZC 3300
DZC 3300 is a vertical-type anchor windlass, available in electric or hydraulic drive versions, providing a maximum pulling capacity of 3,600 kg. It features a gypsy suitable for 18, 20, or 23 mm DIN766 chains and 17.5, 19, 20.5, or 22 mm stud-link chains.
Technical Specifications
DZC 3300E (AC)
Drive Type
AC Electric Motor (210–400V, 3-phase)
Continuous Pull
3,000 kg (30 min)
Maximum Pull
3,750 kg (2 min)
Hauling Speed (Single Speed)
13 m/min
Chain Size
18-20-23 mm DIN766, 17.5-19-20.5-22 Stud-link
Approximate Weight
330 kg
Current Draw / Hydraulic Pressure – Flow Rate
15.4A (400V – 50 Hz)
Motor Power
7500W (400V – 50 Hz)
DZC 3300H (Hidrolik)
Drive Type
Hydraulic Motor
Continuous Pull
3,300 kg (30 min)
Maximum Pull
3,650 kg (2 min)
Hauling Speed (Single Speed)
12 m/min
Chain Size
18–20–23 mm DIN766, 17.5–19–20.5–22 mm Stud-link
Approximate Weight
280 kg
Current Draw / Hydraulic Pressure – Flow Rate
130 bar – 45 L/min
Motor Power
—
Features
The gypsy is equipped with both a clutch and a band brake, allowing the gypsy and warping drum to operate independently.
The chain can be released by loosening the band brake.
The gypsy is engaged through a dog clutch mechanism.
Electric motor-driven models are equipped with a torque limiting coupling for overload protection.
The drive shaft and brake screw are made of high-strength stainless steel.
Options
- AC electric motor drive.
- Hydraulic motor drive.
- In line or right angle gearbox-motor installation.
- Windlass with warping drum or without drum (low profile).
- Polyurethane painted steel parts above deck.
- Mirror polished stainless steel parts above deck.
- Polished or chrome plated bronze parts above deck.
- Starter with frequency converter.
- Remote hydraulic released gypsy brake.