Anchoring and Mooring
Systems
Systems
Horizontal Windlasses
DZC 1701/1702
Technical Specifications
DZC 1701E / 1702E (AC)
Drive Type
AC Electric Motor (210–400V, 3-phase)
Continuous Pull
1,750 kg (7,500W – 30 min)
Maximum Pull
2,200 kg (7,500W – 2 min)
Hauling Speed (Single Speed)
13 m/min
Chain Size
14–16–18 mm DIN766, 12.5–14–16 mm Stud-link
Approximate Weight
275 / 325 kg
Current Draw
11.2A (5500W) – 15.4A (7500W)
Motor Power
5500W – 7500W (400V – 50 Hz)
DZC 1701H / 1702H (Hydraulic)
Drive Type
Hydraulic Motor
Continuous Pull
1,750 kg (30 min)
Maximum Pull
1,950 kg (2 min)
Hauling Speed (Single Speed)
12 m/min
Chain Size
14–16–18 mm DIN766, 12.5–14–16 mm Stud-link
Approximate Weight
185 / 220 kg
Hydraulic Pressure/ Flow Rate
120 bar – 40 L/min
Motor Power
—
Features
The gypsy is equipped with both a clutch and a band brake, allowing the gypsy and warping drum to operate independently.
The chain can be released by loosening the band brake.
The gypsy is engaged through a dog clutch mechanism.
Electric motor-driven models are equipped with a torque limiting coupling for overload protection.
The housing is made of galvanized steel construction, with the top cover and motor cover made of marine-grade aluminum. All surfaces are coated with polyurethane paint.
The drive shaft and brake screw are made of high-strength stainless steel.
Electric motor versions use a direct-on-line (DOL) starter.
Options
-
Polyurethane-painted steel gypsy, clutch, and warping drum.
-
Bronze gypsy, clutch, and warping drum.
-
Mirror-polished stainless steel gypsy, clutch, and warping drum.
-
Available in single or double gypsy configurations.
-
Left-hand and right-hand versions are available for single gypsy models.
-
Starter with frequency converter.
-
Hydraulic control valve installed on windlass (optional).
-
Vertical warping drum configuration available.
