Anchoring and Mooring
Systems
Systems
Horizontal Windlasses
DZC 7001/7002
Technical Specifications
DZC 7001E / 7002E (AC)
Drive Type
AC Electric Motor (210–440V, 3-phase)
Continuous Pull
6,500 kg (18500W – 30 min)
Maximum Pull
7,500 kg (18500W – 2 min)
Hauling Speed (Single Speed)
13 m/min
Chain Size
26 mm DIN766, 24–26–28–30–32 mm Stud-link
Approximate Weight
—
Current Draw
29.8A (15000W) – 34.5A (18500W)
Motor Power
15000W – 18500W (400V – 50 Hz)
DZC 7001H / 7002H (Hydraulic)
Drive Type
Hydraulic Motor
Continuous Pull
6,500 kg (30 min)
Maximum Pull
7,200 kg (2 min)
Hauling Speed (Single Speed)
12 m/min
Chain Size
26 mm DIN766, 24–26–28–30–32 mm Stud-link
Approximate Weight
—
Hydraulic Pressure/ Flow Rate
180 bar – 60 L/min
Motor Power
—
Features
The gypsy is equipped with both a clutch and a band brake, allowing the gypsy and warping drum to operate independently.
The chain can be released by loosening the band brake.
The gypsy is engaged through a dog clutch mechanism.
Electric motor-driven models are equipped with a torque limiting coupling for overload protection.
The housing is made of steel construction and coated with polyurethane paint.
The drive shaft and brake screw are made of stainless steel for maximum durability.
Electric motor versions use a direct-on-line (DOL) starter system.
The vertical supports located at both ends of the main shaft increase body strength and allow adjustment of the distance between two gypsies.
Hardened steel gears operate in an oil bath for improved efficiency and extended service life.
Options
AC electric motor drive.
Single or double-speed hydraulic motor drive.
Mirror-polished stainless steel gypsy, clutch, and warping drum.
Available in single or double gypsy configurations.
Left-hand and right-hand versions are available for single gypsy models.
Single or double mooring drum with brake and clutch.
Starter with frequency converter.
Remote hydraulic released gypsy brake.
Foundation to be welded on deck.